ALL IN ONE: AIR COMPRESSOR – DRYER – FILTERS & RECEIVER

SMART TD 4 – 18,5 KW	FLEXI TD 11 – 18,5 KW
BELT DRIVEN – FIXED SPEED	VARIABLE SPEED
FREE AIR DELIVERY:	FREE AIR DELIVERY:
7 bar:  0,69 – 3,15 m3/min	7 bar:  1,87 – 2,78 m3/min
10 bar: 0,42 – 2,36 m3/min	10 bar: 1,73 – 2,30 m3/min
12 bar: 0,37 – 2,10 m3/min	12 bar: 1,36 – 1,99 m3/min

Complete compressed air station which produces air with class 225 according to DIN ISO 8573-1.

Each unit consists of an oil injected screw compressor with pressure at 7, 10 or 12bar, air receiver 270lit [4 – 7,5 KW] or 2 X 125lit [11 – 18,5 KW], refridgerant dryer (dew point +5Oc – class 5), pre filter (for particles <1μm class 2), after filter (for oil residue 0,1 mg/m³, class 2).

This integrated solution satisfies and guarantees the high quality of produced compressed air for industrial use.

The noise levels are extremely low and the total surface covered is also compact and limited!

THE RIGHT SOLUTION AT THE RIGHT PRICE!

FREE AIR DELIVERY:
7 bar: 0,69 – 3.15 m³/min
10 bar: 0,42 – 2,36 m³/min
12 bar: 0,37 – 3,15 m³/min

ADVANTAGES FOR THE CUSTOMER:

• Longer service periods, resulting in a reduced cost for the end user, due to the larger airend and the low speed electric motors with IP 54.
• Small foot print that can be installed almost anywhere.
• Belt driven, with easy access for belt replacement.
• Big airend with lower motor rpms ensures longer lifetime!!
• Constructed under the directives of the ECO Design Rule 2020 for energy consumption according to all European Directives, which guarantees the lower electricity consumption compared to other screw compressors.

This is the ultimate screw compressor for continuous, 24-hr operation.

Oil injected, silent, trustworthy, with extremely low maintenance cost!

Efficient belt-driven operation with almost zero losses in the transmission from the electric motor to the air end. Extremely efficient as an air compressor with continuous load demand, in stations with many compressors.

THE PROFESSIONAL FOR ENERGY SAVING!

FREE AIR DELIVERY:
1,36 – 12,36 m³/min

WORKING PRESSURE:
7-12 bar

 

• Variable speed drive.
• Energy consumption saving of up to 35% compared with a fixed speed air compressor.
• Designed to work in difficult environments.
• Direct driven [for models from 22 up to 75 KW].
• Works as a perfect combination with series FOCUS in air stations of more than one compressors.

Usually, normal compressors are using the 50%-70% of their working capacity, excluding certain picks during the day, when they might use the 100% of their free air delivery capacity.

On those case, normal compressors do not achieve a good air delivery – power ratio.

The air compressors of series FLEXI, in order to cover the above need for improved air delivery during the whole working day, have acquired the following characteristics:

1. Full control of the motor’s rpm by the inverter, which modifies the air delivery so as to cover the specific needs of compressed air at each moment of the day, based on the air user’s demand.
2. Soft starting, without reaching power peaks.
3. Reduced idle times of the electric motor.

THE ECONOMICAL

FREE AIR DELIVERY:
7 BAR 3.95 – 14,14 m³/min
10 BAR 3.33 – 11.34 m³/min
12 BAR 2,70 – 10,19 m³/min

 

• Direct driven power transmission.
• Space-saving technology that also allows installation in confined spaces.
• High efficiency electric motor ΙΕ3 for reduced energy consumption.
• Controller easy to handle, showing all necessary and important parameters on a clear display.
• Clear and structured design of compressor guarantees easy access from all directions.
• Low noise level due to direct driven operation.
• Motors low speed and big sized air ends resulting in long maintenance intervals and reduction of maintenance costs.

POWERFUL AND ENERGY SAVING

FREE AIR DELIVERY:
1,12 – 13,16 m³/min

PRESSURE:
7-12 bar

 

• Oil injected screw compressors with variable speed drive and permanent magnet motor 7,5-75 kW.
• High efficiency electric motor IE 4.
• Compact design of the electric motor (smaller size) which results in smaller footprint.
• Fan controlled by a frequency inverter to keep the exact needed temperature for optimal compressor operation.
• Extremely low noise level and compressed air delivery at the amount required by the user.

Apart from the advantages provided by the variable speed drive through the permanent magnetic motor, the user can also access and control the compressor via the smart control panel with touch screen, for easy handling.

THE KING OF ENERGY SAVING

FREE AIR DELIVERY:
3.20 – 44,60 m³/min

PRESSURE:
7-12 bar

 

• 2-stage oil injected screw compressor for maximum power.
• Variable speed drive through inverter.
• High efficiency electric motor IE 4 [permanent magnet motor].
• Compact design of the electric motor (smaller size) which results in smaller footprint.
• Fan controlled by a frequency inverter to keep the exact needed temperature for optimal compressor operation.
• Extremely low noise level and compressed air delivery at the amount required by the user.

Thanks to the super intelligent controller, the user is always up to date about the condition of the compressor. An intuitive operator guidance combined with a touch screen makes it easy to operate.

SPACE SAVING – SMALL FOOTPRINT

FREE AIR DELIVERY:
0,87 – 6,10 m³/min

PRESSURE:
8-10 bar

 

• Small footprint but also easy access for service and maintenance.
• Large compressor stage with low speeds, lower temperatures and therefore bigger maintenance intervals and longer operation life.
• Low noise emissions, super silenced.
• Variable speed and direct drive.
• Solid piping instead of hoses.
• Intelligent control with multiple functions and user friendly.
• Higher efficiency with IE 4 permanent magnet motor.